MDD071C-N-030-N2M-095GB2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD071C-N-030-N2M-095GB2 is a motor from the MDD Synchronous Motors series and features a continuous torque at standstill of 6.6 Nm. It has an integrated multiturn absolute encoder, digital servo feedback, and a holding brake with a torque of 6.5 Nm. The motor comes with a plain shaft, a centering diameter of 95 mm, and connection from Side B by connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the MDD071C-N-030-N2M-095GB2 synchronous motor for inclusion in the MDD Synchronous Motors series. As a motor intended for digital drive controllers, it converts commanded electrical input into controlled mechanical rotation for axes that require repeatable speed and position in automated machinery. The unit’s mechanical format, integrated feedback, and sealed housing let it fit packaging lines, small manipulators, and other stations where moderate torque and mid-range speed are required. In closed-loop systems, this supports accurate indexing, smooth speed regulation, and stable stopping behavior on compact machine axes.
The motor delivers a nominal speed of 3000 rpm, matching common motion profiles used in general automation. At standstill, it can sustain 6.6 Nm of continuous torque, which supports stable positioning before movement begins. The face has a centering spigot of 95 mm, so alignment to gearboxes or machine mounts remains repeatable. Power and feedback conductors exit on side B through a keyed connector, which can simplify cable routing where clearance is limited on the opposite face. Rotor position feedback is supplied by an integrated multi-turn absolute encoder, allowing the drive to retain position information across multiple revolutions after a power interruption. This combination supports controlled starts and accurate returns to known positions during repeated machine cycles.
A blocking brake applies 6.5 Nm of static torque when drive current is disabled, helping hold the shaft during dwell periods or short stops between moves. Position data is transmitted through Digital servo feedback (DSF), so compatible controllers can process motion feedback through the motor’s digital interface. The motor uses a plain shaft for direct coupling, and the fitted shaft seal helps keep dust and lubricant away from internal components during routine operation. This arrangement suits axes that pause frequently and need stable holding behavior between commanded motions.
Frequently Asked Questions about MDD071C-N-030-N2M-095GB2:
Q: What type of encoder does the MDD071C-N-030-N2M-095GB2 motor use?
A: This model is equipped with an integrated multiturn absolute encoder for precise position tracking.
Q: What is the holding torque of the brake included in the MDD071C-N-030-N2M-095GB2?
A: The holding brake on this motor provides a holding torque of 6.5 Nm.
Q: What shaft and sealing configuration does the MDD071C-N-030-N2M-095GB2 motor provide?
A: This motor features a plain shaft design and includes a shaft seal to help prevent contamination.
Q: What is the nominal speed of the MDD071C-N-030-N2M-095GB2 synchronous motor?
A: The nominal speed of the MDD071C-N-030-N2M-095GB2 is 3000 min⁻¹.
Q: Where is the connection point located on the MDD071C-N-030-N2M-095GB2 motor?
A: The electrical connection is made using a connector located on Side B of the housing.
