MDD071C-N-030-N2M-095GB1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD071C-N-030-N2M-095GB1 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. This motor has a nominal speed of 3000 min⁻¹ and a continuous torque at standstill of 6.6 Nm. It features a 95 mm centering diameter and comes with an integrated multiturn absolute encoder and a blocking brake with 3.0 Nm holding torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071C-N-030-N2M-095GB1 is a permanent-magnet synchronous motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Intended for use with digital drive controllers, the unit converts controlled current into precise torque and speed for indexing tables, pick-and-place axes, and light machining spindles. With integrated position feedback and a blocking brake, the motor supports accurate motion sequences and secure load holding in compact automation cells.
A centering diameter of 95 mm supports accurate engagement with common motor plates and helps maintain coaxial alignment with coupled mechanics. Standard balancing keeps residual vibration low at rated speed, which supports smooth operation in positioning applications. The continuous standstill torque of 6.6 Nm resists static process forces, while a nominal speed of 3000 rpm suits medium-speed positioning loops. When power is removed, the integrated brake provides 3.0 Nm of holding torque so vertical or suspended loads remain fixed. Power and feedback conductors exit on side B, and a single circular connector simplifies cable routing. The housing is delivered in its standard form factor to match enclosure cutouts already used in this motor family.
The onboard multiturn encoder supplies absolute position data through digital servo feedback, allowing immediate reference without homing cycles. Mechanical output is provided by a plain shaft, and a fitted shaft seal helps prevent coolant or dust from entering along the journal. Frame size 071 corresponds to the motor’s outer dimensions and mounting bolt circle, while motor length code C indicates the stator depth used for this version. The standard shaft end is located on the drive side, and there is no secondary shaft on side B. This layout keeps the motor compact and supports continuous-duty industrial operation.
Frequently Asked Questions about MDD071C-N-030-N2M-095GB1:
Q: What type of encoder is integrated in the MDD071C-N-030-N2M-095GB1 motor?
A: This model features an integrated multiturn absolute encoder for precise position detection and motion control.
Q: What is the holding brake torque of the MDD071C-N-030-N2M-095GB1 motor?
A: The MDD071C-N-030-N2M-095GB1 provides a holding brake torque of 3.0 Nm to secure loads when the motor is not powered.
Q: What is the continuous standstill torque rating of the MDD071C-N-030-N2M-095GB1?
A: This servo motor offers a continuous torque of 6.6 Nm at standstill, enabling consistent performance under load.
Q: Where is the connector located on the MDD071C-N-030-N2M-095GB1 motor?
A: The electrical connection is provided by a connector positioned on side B of the motor.
Q: What type of shaft and seal does the MDD071C-N-030-N2M-095GB1 motor have?
A: A plain shaft with a shaft seal is provided, enhancing protection from contaminants at the output interface.
