MDD071C-N-017-N2T-095GA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911307686
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
47 Seconds
The Bosch Rexroth Indramat MDD071C-N-017-N2T-095GA2 is a motor for digital drive controllers from the MDD Synchronous Motors series, featuring a continuous torque at standstill of 6.6 Nm and a centering diameter of 95 mm. It is equipped with a plain shaft, side A connector, and an integrated multiturn absolute encoder for motor feedback. This model includes a holding brake with a torque of 6.5 Nm and comes with a shaft seal and standard housing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071C-N-017-N2T-095GA2 is a synchronous motor in the MDD Synchronous Motors series manufactured by Bosch Rexroth Indramat. Intended for use with digital drive controllers, it converts controlled current into regulated mechanical rotation so that automated axes maintain commanded speed and position. The unit fits compact installations that demand rapid response and accurate following-error control in assembly equipment, material-handling gantries, and other industrial motion stations. Its compact format also suits machine sections where mounting space is restricted and axis inertia must stay manageable.
The motor delivers a continuous standstill torque of 6.6 Nm, allowing stable holding force without overheating during prolonged dwell periods. A centering diameter of 95 mm positions the stator accurately inside mating flanges, minimizing radial misalignment. Power and feedback conductors exit on Side A through a keyed connector, simplifying cable routing in tight cabinets. A blocking brake rated at 6.5 Nm locks the shaft when power is removed, helping retain position on vertical axes and indexed tooling. Position data are supplied by an Integrated multiturn absolute encoder, which counts full rotations and fractional angles for homing-free startup. Standard housing and rotor balancing keep vibration within permissible limits during normal operation.
Closed-loop regulation is supported by Digital servo feedback (DSF), enabling the drive to compare commanded and actual positions during each control cycle. The frame follows the series coding with size 071 and length code C, giving the motor a medium-inertia profile that balances acceleration and load matching. A Plain shaft transmits torque directly to couplings, and a fitted shaft seal helps prevent lubricant migration and dust ingress. The motor ships with a single-ended shaft, leaving no side B extension. Its connection type remains a shielded connector to help maintain EMC compliance in multi-axis assemblies and reduce electrical noise between adjacent components.
Frequently Asked Questions about MDD071C-N-017-N2T-095GA2:
Q: What type of holding brake is included on the MDD071C-N-017-N2T-095GA2 motor?
A: This model includes a 6.5 Nm blocking brake for holding applications.
Q: What is the continuous torque at standstill for the MDD071C-N-017-N2T-095GA2 motor?
A: The MDD071C-N-017-N2T-095GA2 delivers a continuous standstill torque of 6.6 Nm.
Q: What type of encoder is used in the MDD071C-N-017-N2T-095GA2 synchronous motor?
A: This motor incorporates an integrated multiturn absolute encoder.
Q: What method of motor feedback does the MDD071C-N-017-N2T-095GA2 utilize?
A: The motor provides digital servo feedback (DSF) for precise position information.
Q: How is the electrical connection configured on the MDD071C-N-017-N2T-095GA2 motor?
A: Connection to this motor is achieved via a connector on Side A.
