MDD071B-N-060-N2T-095GL2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD071B-N-060-N2T-095GL2 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. This motor features an integrated multiturn absolute encoder, standard housing, and a plain shaft with shaft seal. It provides a continuous torque at standstill of 4.4 Nm and a holding brake torque of 6.5 Nm, with a nominal speed of 6000 revolutions per minute.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071B-N-060-N2T-095GL2 is a synchronous motor from Bosch Rexroth Indramat in the MDD Synchronous Motors series. It is intended for closed-loop motion axes operated by digital controllers, where accurate positioning and stable speed regulation are required. In this role, the motor converts commanded current into controlled rotary motion for indexing tables, handling axes, and similar servo-driven equipment. Because it is built for digital control, the drive can monitor rotor behavior continuously and correct speed or position error during operation. A blocking brake is integrated for load holding during power-off periods, and the motor uses a standard housing and balancing arrangement for direct installation in compatible drive assemblies.
The motor reaches a nominal speed of 6000 rpm, allowing short cycle times on pick-and-place arms or spindle stages that require high shaft velocity. During sustained standstill, it delivers 4.4 Nm of continuous torque, which provides holding force while current remains applied to the windings. The integrated brake provides 6.5 Nm of holding torque, so a vertical axis can remain fixed when the power stage is disabled. A centering diameter of 95 mm helps align the flange to mating surfaces, and the power and feedback connectors exit on the left side for cable routing from that direction. Position data is returned through digital servo feedback, allowing the controller to maintain closed-loop operation without external sensors.
An integrated multi-turn absolute encoder records shaft position over multiple revolutions, so the control system retains absolute position information after startup. The plain shaft provides a smooth mounting surface for clamp-style couplings and avoids the interruption created by a keyway. Frame code 071 identifies the motor size used for this B-length version, which places the unit within the correct mechanical envelope. This configuration is suitable for packaging equipment, electronic assembly systems, and other servo axes that depend on repeatable motion under frequent starts, stops, and direction changes.
Frequently Asked Questions about MDD071B-N-060-N2T-095GL2:
Q: What is the continuous torque at standstill for the MDD071B-N-060-N2T-095GL2 motor?
A: The MDD071B-N-060-N2T-095GL2 features a continuous torque at standstill of 4.4 Nm.
Q: What type of encoder is included with the MDD071B-N-060-N2T-095GL2 motor?
A: This model includes an integrated multiturn absolute encoder for precise position feedback.
Q: Does the MDD071B-N-060-N2T-095GL2 motor have a holding brake, and what is its torque?
A: A blocking brake with a holding torque of 6.5 Nm is equipped on this motor.
Q: What is the connection direction and type on the MDD071B-N-060-N2T-095GL2 motor?
A: The connection for this motor is a connector oriented to the left.
Q: What is the nominal speed of the MDD071B-N-060-N2T-095GL2 motor?
A: This motor achieves a nominal speed of 6000 min⁻¹ during operation.
