Product Description:

The MDD071B-N-060-N2T-095GL0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it turns electrical commands into controlled rotation for packaging stations, handling axes, and electronics assembly tools. By combining tight speed regulation with direct position feedback, the unit forms the moving element of a closed-loop axis and supports high cycle rates where repeatable motion is critical. It can be paired with machine axes that require short settling times after acceleration or reversal.

At standstill the motor supplies 4.4 Nm of continuous torque, indicating the load it can hold indefinitely while remaining within its thermal limits. During motion it reaches a nominal speed of 6000 rpm, which permits high spindle or belt speeds without external gearing. Mounting is centered by a 95 mm registration boss that aligns the stator precisely on the machine plate. Position data arrives through an integrated multi-turn absolute encoder, letting the drive read an absolute count over multiple revolutions after power-up. Power, feedback, and protective earth are transferred through a single connector, simplifying installation. The high nominal speed also supports direct-coupled applications where adding a gearbox would increase backlash or inertia.

Cable glands leave the housing on the left side, so harnesses can drop straight to a panel when the motor is flange-mounted in its usual orientation. The motor has a plain shaft with the standard single-ended form, and it is supplied with a shaft seal to help keep oil mist away from the encoder chamber. It is delivered without a blocking brake, so holding torque must be provided externally when the axis is stopped. The 071 frame provides the mounting proportions used for this motor size. That layout can also reduce cable bending near the motor when the machine uses fixed side panels or closely spaced drive components.