Product Description:

The MDD071B-N-060-N2T-095GA0 synchronous motor is built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts commanded current into precise mechanical motion for positioning axes in industrial automation equipment. A standard housing with a shaft seal protects interior components against factory contaminants, and the compact motor format suits high-speed pick-and-place, packaging, and light machining tasks. Its synchronous design supports accurate speed and position control when paired with a compatible digital controller, making it suitable for coordinated motion in compact multi-axis machines.

The mechanical interface includes a centering diameter of 95 mm, allowing repeatable pilot fits on metric motor mounts. At standstill, the motor delivers 4.4 Nm of continuous torque, so the axis can hold static loads without thermal overload. When energized, the rotor reaches a nominal speed of 6000 rpm, supporting production cycles that require rapid index times. The control loop uses digital servo feedback, which supplies high-resolution position data to the controller, and power, signal, and protective earth conductors exit on Side A through a single connector.

An integrated multiturn absolute encoder reports absolute angular position after power loss, which removes the need for external homing routines. The motor has a plain shaft, and the front bearing arrangement is guarded by a shaft seal that helps block splash ingress during washdown cycles. It is supplied without a blocking brake, so braking torque must come from the drive or an external clamp on vertical axes. Length designation B identifies the internal stack height, while the housing keeps the standard outline used for the 071 frame size. The connector arrangement keeps cable routing direct in enclosed machine spaces and leaves the shaft side clear for coupling hardware.