MDD071B-N-060-N2S-095PR2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD071B-N-060-N2S-095PR2 is part of the MDD Synchronous Motors series and is a motor for digital drive controllers. This unit features a nominal speed of 6000 rpm and a continuous torque at standstill of 4.4 Nm. It includes a holding brake with 6.5 Nm brake torque and has digital servo feedback for motor feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD Synchronous Motors series produced by Bosch Rexroth Indramat includes the MDD071B-N-060-N2S-095PR2. This brushless synchronous servo motor is intended for use with digital drive controllers, where it converts regulated electrical input into precise rotary motion for automated assembly stations, pick-and-place mechanisms, and light machining equipment. By delivering controlled velocity and torque, the unit serves as the final electromechanical stage that turns motion commands into axis movement. Its brushless design also supports repeatable operation because there are no brushes to wear during normal service.
Its centering pilot measures 95 mm, providing a reference diameter that aligns the motor housing with gearbox or machine frames so concentricity is maintained during operation. The rotor can reach a nominal speed of 6000 rpm, which supports rapid indexing where short cycle times are important. At standstill, the motor can deliver a continuous torque of 4.4 Nm, allowing it to hold a load without overheating while the axis waits for the next command. Power and feedback conductors exit on the right side and terminate through a plug-in connector, which helps when routing cables in compact machine layouts. Position information is supplied through digital servo feedback, giving the drive controller the data needed for closed-loop control of position, speed, and torque. This feedback arrangement also supports stable response during changes in load and direction.
An internal blocking brake supplies 6.5 Nm of holding torque to secure vertical or suspended loads once power is removed. The single-ended shaft is machined with a keyway for positive torque transmission, and a shaft seal is fitted to reduce lubricant escape and particle ingress at the coupling point. The housing uses the 071 motor size with length code B, which keeps the motor within the dimensional format used for this frame. This layout supports installation in machines that need a compact servo motor with integrated holding capability and sealed shaft output.
Frequently Asked Questions about MDD071B-N-060-N2S-095PR2:
Q: Does the MDD071B-N-060-N2S-095PR2 motor feature a holding brake and what is its torque?
A: This motor is equipped with a holding brake that delivers 6.5 Nm of torque.
Q: What type of motor feedback does the MDD071B-N-060-N2S-095PR2 offer?
A: Digital servo feedback (DSF) is provided for precise motor position monitoring.
Q: What is the connection direction and type for the MDD071B-N-060-N2S-095PR2 motor?
A: The connection on this model is a right-facing connector for streamlined installation.
Q: What shaft type and seal are present on the MDD071B-N-060-N2S-095PR2 motor?
A: This motor features a keyway shaft with a seal for added protection.
Q: What is the nominal speed rating of the MDD071B-N-060-N2S-095PR2 motor?
A: The nominal speed is rated at 6000 min⁻¹, which supports rapid operation cycles.
