Product Description:

The MDD071B-N-060-N2S-095PL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into torque to position or regulate machine axes in automated equipment such as packaging stations and pick-and-place gantries. Its design supports responsive closed-loop motion in applications that require repeatable acceleration, accurate positioning, and stable behavior under changing loads.

This model delivers a continuous standstill torque of 4.4 Nm, allowing stable force output for holding or low-speed indexing. Its rated mechanical speed reaches 6000 rpm, supporting fast cycle times when paired with high-bandwidth drives. Mounting alignment is aided by a centering diameter of 95 mm, and the rotor is trimmed to a standard balancing class that helps limit shaft vibration. Torque is transmitted through a keyway shaft, while the shaft end uses the standard pattern without a side-B extension to reduce overhang. Because the motor is supplied without a blocking brake, any required static holding must be provided by the drive or an external mechanical lock. The Size 071 frame and B length keep the housing compact enough for closely spaced axes while still providing the thermal mass expected for this motor class.

The electrical terminations are arranged on the left side, and power plus feedback conductors are brought out through a coded connector for quick interchange in modular machines. Position information is returned via digital servo feedback, enabling fine velocity loops and consistent reference behavior during startup and operation. Contaminant ingress at the drive end is limited because the unit is built with a shaft seal, which is useful where coolants or airborne oils are present. This connection layout supports orderly cable routing in machines that use preterminated motor and feedback leads while keeping installation space manageable.