Product Description:

The MDD071B-N-060-N2S-095PB2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts electrical commands into precise rotary motion for positioning axes, feeders, and other automated stations that rely on rapid speed changes and tight feedback loops. Its synchronous design supports responsive acceleration and stable speed control in closed-loop industrial machinery.

This model produces a continuous standstill torque of 4.4 Nm, giving the drive system a baseline for constant load support without overheating. A peak operating velocity of 6000 rpm permits high-speed cycles in packaging or pick-and-place equipment. The centering pilot on the flange measures 95 mm, which aligns the housing accurately on machine frames while the balancing grade remains at a standard level to reduce residual vibration. Power and feedback conductors exit on Side B, and this fixed orientation helps keep cable routing straightforward. Closed-loop control is handled by digital servo feedback (DSF), so the drive receives high-resolution position data for tight velocity regulation. The housing and shaft end are standard designs, the motor length code is B, and the single-ended shaft arrangement omits a second output at the rear.

For safety and load holding during shutdown, the unit is supplied with a blocking brake that generates 6.5 Nm of static torque. A shaft seal is installed to restrict dust or coolant ingress along the driven end, and the frame size is identified as 071 to help match the motor diameter with gearboxes or couplings. Torque is transmitted through a keyway shaft, which provides positive mechanical locking to pulleys or hubs. These features support secure power transmission and help the motor remain suitable for applications that require accurate positioning and stable operation.