Product Description:

The MDD071B-N-060-N2S-095GB1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed to pair with digital drive controllers, it converts precisely regulated current into fast rotary motion for industrial axes that require accurate positioning, quick reversals, and stable cycle times. The motor uses a single plug-in connector arrangement instead of pigtail leads, which keeps the external connection layout compact and organized.

The motor reaches a nominal speed of 6000 rpm, making it suitable for high-speed spindle or handling tasks. At standstill, it delivers a continuous torque of 4.4 Nm, which supports sustained load holding without excessive temperature rise. Rotor position and velocity are returned to the drive through digital servo feedback (DSF), allowing stable regulation and precise control response. Power, brake, and feedback connections are oriented on Side B, and the flange uses a 95 mm locating diameter for accurate alignment during mounting. The motor also has a plain shaft, which supports direct coupling in applications that do not require a keyed output.

The integrated holding brake provides 3.0 Nm of torque to secure loads when power is removed. The motor also has a shaft seal that helps limit lubricant migration and keep coolant splash away from internal components. With frame size 071 and length code B, the housing stays compact while retaining enough thermal mass for continuous operation. Dynamic performance is supported by standard balancing, which helps reduce residual vibration at higher speed. The motor has a standard shaft end on the drive side and no second shaft at the opposite end.