Product Description:

The MDD071B-N-060-N2S-095GA2 is a synchronous servo motor produced by Bosch Rexroth Indramat in the MDD Synchronous Motors series. Designed for use with digital drive controllers, it delivers rotary motion to automated axes that require high speed and repeatable positioning. The motor combines a slim stator with an internal permanent-magnet rotor, allowing the controller to regulate torque from encoder feedback. In industrial automation, it functions as an electromechanical actuator that converts commanded current into controlled shaft rotation. It is suitable for servo axes in packaging, handling, and assembly equipment that depend on responsive acceleration and stable feedback.

Dimensional alignment relies on a centering flange diameter of 95 mm that matches standard mounting plates. Under continuous excitation at standstill, the motor sustains 4.4 Nm of torque, which helps support stationary loads without added gearing when thermal limits are observed. The rotor reaches a nominal speed of 6000 rpm, giving fast motion for indexing and transfer tasks. Position and velocity data return through digital servo feedback, allowing closed-loop control with fine resolution. Power and encoder conductors share a sealed connector, simplifying cable routing and reducing the number of separate connection points. This arrangement keeps the feedback channel and power path in one protected entry point at the motor. The motor uses size 071 with frame length B, along with a standard housing and standard dynamic balancing.

For static holding or emergency stops, the blocking brake applies 6.5 Nm directly to the shaft. Cabling exits on Side A, which suits layouts where the drive cabinet is placed beside the motor. The output uses a plain shaft, and the motor is supplied with a shaft seal for use in dusty or oily areas. A sealed shaft area helps limit the entry of contaminants near the bearing zone during routine operation. The motor has no secondary shaft end, which helps conserve space at the machine interface. The standard housing supports compact installation where a short overall motor package is preferred.