MDD071B-N-060-N2M-095GA0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD071B-N-060-N2M-095GA0 is a motor from the MDD Synchronous Motors series, designed for digital drive controllers. It features a nominal speed of 6000 min⁻¹, continuous torque at standstill of 4.4 Nm, and comes with an integrated multiturn absolute encoder. The motor has a 95 mm centering diameter and uses a plain shaft with a shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071B-N-060-N2M-095GA0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and included in the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it provides closed-loop rotary motion for positioning, feed, and spindle axes in factory automation. Its 071 frame size and B length code create a compact envelope for machines with limited installation space, and the stator and rotor use a standard balancing grade so vibration remains controlled during high-speed operation. Because it is used with digital drive controllers, control corrections can be applied continuously during acceleration, deceleration, and steady-state operation.
The rotor can deliver a continuous standstill torque of 4.4 Nm, allowing the motor to hold load at zero speed without exceeding its thermal limits under rated conditions. During operation, it can reach a nominal speed of 6000 rpm, which suits fast positioning and spindle-related motion when paired with a compatible inverter. Mechanical alignment is supported by the 95 mm centering diameter, and all power and feedback conductors exit on Side A through a sealed connector interface. Motion information is transmitted by digital servo feedback, allowing the controller to evaluate rotor position and speed with low latency during closed-loop control. The sealed connector arrangement also helps keep cabling organized where installation space around the motor is limited.
Position tracking is supported by an integrated multiturn absolute encoder that retains shaft angle data across power cycles, so the control system can recover position without losing revolution count. This feedback arrangement is useful when position information must remain available after a restart. The unit is supplied without a blocking brake, so any holding function after power removal must come from the drive or external mechanics. A plain shaft provides a straightforward mechanical interface for couplings or pulleys. Protection against oil ingress is provided by a shaft seal mounted at the front bearing.
Frequently Asked Questions about MDD071B-N-060-N2M-095GA0:
Q: What type of encoder is used in the MDD071B-N-060-N2M-095GA0 motor?
A: The MDD071B-N-060-N2M-095GA0 features an integrated multiturn absolute encoder for precise positional feedback.
Q: What is the continuous torque at standstill for the MDD071B-N-060-N2M-095GA0 motor?
A: This motor delivers a continuous torque of 4.4 Nm at standstill for stable operations.
Q: What is the nominal speed rating for the MDD071B-N-060-N2M-095GA0?
A: The nominal speed of the MDD071B-N-060-N2M-095GA0 is rated at 6000 min⁻¹.
Q: What type of shaft and seal does the MDD071B-N-060-N2M-095GA0 include?
A: A plain shaft with a shaft seal is provided, ensuring a standard shaft configuration with added protection.
Q: Does the MDD071B-N-060-N2M-095GA0 motor include a holding brake?
A: This model does not come with a holding brake installed.
