Product Description:

The MDD071B-N-030-N2T-095GR2 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts electrical commands into controlled rotary motion for precise positioning and velocity regulation in industrial automation lines such as pick-and-place stations, packaging axes, and light conveyor drives. Power and feedback conductors terminate on a connector, and the ports are oriented on the right side to match cabinets that route cables from that direction. This arrangement supports compact machine layouts where cable routing space is limited near the motor.

It develops a continuous standstill torque of 4.4 Nm, letting the axis sustain static loads without overheating, and it reaches a rated speed of 3000 rpm for dynamic duty cycles. A centering flange diameter of 95 mm aligns the frame accurately on machine adapters, while the size code 071 and length code B keep the overall package compact. Closed-loop regulation is executed through digital servo feedback (DSF), allowing the drive to read actual shaft position with high precision during motion. Standard rotor balancing and the housing design reduce vibration transfer, and a factory-installed shaft seal limits lubricant migration into the stator cavity.

For parking or emergency stops, an internal blocking brake supplies 6.5 Nm of holding torque to prevent unintended motion when the controller is disabled. High-resolution feedback across multiple turns is provided by an integrated multiturn absolute encoder, so homing sequences are unnecessary after power restoration. A plain shaft in the standard single-ended layout couples directly to pulleys or couplings, and the absence of a side-B extension saves space in narrow machine frames. The standard housing encloses the brake, encoder, and bearings to help keep contamination away from critical magnetic surfaces.