MDD071B-N-030-N2T-095GR1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911268355
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
33 Seconds
The Bosch Rexroth Indramat MDD071B-N-030-N2T-095GR1 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. It features a centering diameter of 95 mm, a plain shaft with shaft seal, and provides a continuous torque of 4.4 Nm at standstill. This motor includes an integrated multiturn absolute encoder, a blocking brake with 3.0 Nm holding torque, and a digital servo feedback system.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071B-N-030-N2T-095GR1 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Intended for digital drive controllers, it provides precise rotational motion and position control for automated pick-and-place axes, indexing tables, and similar industrial machinery. Its synchronous design supports accurate response to commanded current changes, which helps the drive maintain repeatable motion during positioning and speed-controlled operation.
This model delivers 4.4 Nm of continuous torque at standstill, allowing the motor to support static loads without thermal overload at rated conditions. Under rated excitation, it operates at a nominal speed of 3000 rpm, matching the drive’s electrical output to the mechanical shaft speed. A built-in holding brake supplies 3.0 Nm of holding torque so vertical axes can remain secured when power is removed. A centering shoulder diameter of 95 mm provides the pilot fit for mounting and helps maintain concentricity. Power and feedback cabling exit on the right side, which can simplify routing when the drive is mounted on that side of the machine frame. The enclosure follows the standard housing outline, so its dimensions remain consistent with other motors in the series.
For wiring convenience, the unit uses a single connector that carries motor phases, brake conductors, and feedback lines. Position data is supplied by an integrated multiturn absolute encoder that transmits through Digital servo feedback (DSF), giving the controller high-resolution commutation and position information without external sensors. Mechanical output is provided by a plain shaft with a shaft seal to limit lubricant migration, and the shaft is present only on side A so couplings do not interfere with the rear of the frame. The 071 size code, together with motor length code B, indicates the frame and active length used for this model. This arrangement supports compact installation where cable routing and coupling clearance must be managed within a limited machine envelope.
Frequently Asked Questions about MDD071B-N-030-N2T-095GR1:
Q: What type of encoder is included on the MDD071B-N-030-N2T-095GR1 motor?
A: The MDD071B-N-030-N2T-095GR1 features an integrated multiturn absolute encoder for precise position feedback.
Q: What is the continuous torque at standstill for the MDD071B-N-030-N2T-095GR1?
A: This model delivers a continuous standstill torque of 4.4 Nm for sustained load holding.
Q: Does the MDD071B-N-030-N2T-095GR1 motor have a holding brake, and what is its brake torque?
A: A blocking brake with a holding torque of 3.0 Nm is included on this motor.
Q: What is the connection type and direction for the MDD071B-N-030-N2T-095GR1?
A: The electrical connection is made via a connector positioned to the right.
Q: What type of shaft and seal does the MDD071B-N-030-N2T-095GR1 motor use?
A: This motor is equipped with a plain shaft and a shaft seal for added environmental protection.
