Product Description:

The MDD071B-N-030-N2T-095GL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. Intended for use with digital drive controllers in automated equipment, it converts controlled three-phase current into rotary motion while reporting position data for closed-loop regulation. The unit fits compact machinery because the 071 frame and B length code keep overall dimensions low without sacrificing power. This layout suits robotics, pick-and-place stations, and feeder modules that require accurate speed control, repeatable positioning, and stable torque response during frequent start-stop motion.

At the mechanical interface, the centering pilot measures 95 mm, allowing rigid alignment with gearboxes and mounting plates. The rotor sustains a continuous standstill load of 4.4 Nm, so the motor can hold a static position without exceeding thermal limits. A rated speed of 3000 rpm gives the drive a common synchronous velocity for indexing or winding tasks. Rotor position is detected by an integrated multi-turn absolute encoder, and feedback travels over DSF, enabling the controller to track multiple revolutions with digital resolution. This feedback arrangement helps the connected drive maintain accurate position data after power interruptions and during repeated directional changes.

A blocking brake supplies 3.0 Nm of holding torque to lock vertical axes when power is removed, and the power-signal connector faces the left to match side-mounted cable ducts. Standard dynamic balancing helps reduce vibration within the size-071, B-length housing, while the construction stays lightweight through a single-ended shaft arrangement. Motion is transferred through a plain shaft fitted with a shaft seal to help prevent oil or coolant ingress at the output end. The standard housing finish supports general industrial use, and the connector arrangement allows orderly cable routing in compact machine layouts.