MDD071B-N-030-N2T-095GB0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911263551
The Bosch Rexroth Indramat MDD071B-N-030-N2T-095GB0 is a synchronous motor in the MDD Synchronous Motors series. It delivers a continuous torque at standstill of 4.4 Nm with a nominal speed of 3000 min⁻¹ and has a centering diameter of 95 mm. This motor features an integrated multiturn absolute encoder and digital servo feedback with a plain shaft and shaft seal.
Internal Product Review
The MDD071B-N-030-N2T-095GB0 is a Bosch Rexroth Indramat synchronous motor for digital drive controllers with 3000 min⁻¹ nominal speed and 4.4 Nm continuous torque at standstill. Digital servo feedback and an integrated multiturn absolute encoder support accurate control and consistent positioning performance. A shaft seal and plain shaft make the unit a dependable choice for precise industrial motion applications.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071B-N-030-N2T-095GB0 is a synchronous servo motor built by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into rotary motion for positioning and variable-speed tasks in automated plant equipment. The unit uses a standard housing, and power and feedback lines are routed through a single rear-mounted connector. This arrangement helps keep cable routing compact when the motor is installed close to moving axes and leaves no need for a separate terminal box.
A centering diameter of 95 mm aligns the stator flange with the machine interface and helps keep radial runout within tolerance. The motor can deliver a continuous standstill torque of 4.4 Nm without forced cooling, which supports steady holding force for index tables and clamping applications. During motion, the rotor reaches a nominal speed of 3000 rpm, matching the operating range used by many packaging and material-handling drives. Cables leave in the connection direction on side B, keeping wiring clear of the drive shaft. Position data come from an integrated multiturn absolute encoder, so the control system can retain position information through multiple revolutions. The motor uses length code B, which gives it a medium housing length for this frame.
Closed-loop control uses the drive’s digital servo feedback channel to transmit high-resolution position and velocity information. Because the design is without a blocking brake, any static holding requirement must be provided by drive torque or a separate mechanical device. Rotor symmetry is maintained by standard balancing, which helps limit vibration as the 071 frame size operates at rated speed. The motor has a plain shaft for couplings, pulleys, or similar transmission components, and a shaft seal is present to reduce lubricant migration toward the load side. The shaft end on side A is standard, while side B has no projecting shaft, which helps keep the overall motor length compact.
