Product Description:

The MDD071B-N-030-N2S-095GL1 is a synchronous servo motor produced by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded electrical input into mechanical rotation for positioning, conveying, and formatting axes in automated machinery. Its standard housing and balancing make it suitable for compact machine layouts where stable speed control and repeatable motion are required. This operating style suits feed units, transfer systems, and indexing mechanisms that cycle frequently during normal production.

At rated conditions, the motor can deliver a continuous stall torque of 4.4 Nm, providing steady force for axes that must hold a load without motion while energized. Its rotor reaches a nominal speed of 3000 rpm, so the drive can support fast travel while still maintaining closed-loop control. A flange centering diameter of 95 mm helps align the motor accurately to the machine base and preserve concentricity during installation. The unit is supplied with a blocking brake, and that brake provides up to 3.0 Nm of static torque when the axis must remain in place after power is removed.

Position data are returned through digital servo feedback (DSF), allowing the drive to coordinate current, speed, and position control with consistent response as the load changes. Power and feedback conductors terminate on a connector located on the left side of the stator housing, which helps simplify cable routing in tightly packed multi-axis assemblies. The rotor uses a plain shaft with an integrated shaft seal, reducing leakage paths while supporting connection to pulleys, couplings, or gearboxes. This layout is well suited to machine sections where reliable feedback, straightforward installation, and secure holding during stops are important.