MDD071B-N-030-N2G-095GB0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD071B-N-030-N2G-095GB0 is part of the MDD Synchronous Motors series and serves as a motor for digital drive controllers. It features a nominal speed of 3000 min⁻¹, offers a continuous torque at standstill of 4.4 Nm, and uses resolver feedback. The motor has a centering diameter of 95 mm, a plain shaft with shaft seal, and connection direction on Side B through a connector.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071B-N-030-N2G-095GB0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed to operate with digital drive controllers, the unit converts electrical command signals into controlled rotary motion for positioning axes, conveyor sections, and other motion tasks in automated machinery. It offers a combination of feedback, mounting fit, and shaft features that support direct integration into closed-loop drive systems. This type of motor is suited to applications where the drive must respond quickly to changing commands and load conditions.
Its mechanical interface uses a 95 mm centering diameter that aligns the flange concentrically with gearboxes or mounting plates, while standard balancing keeps vibration within limits for speeds up to the rated 3,000 rpm. Power and signal cables reach the motor from the rear because the terminals are oriented on Side B, and they terminate in a sealed connector that simplifies cable replacement during service. Under continuous stall conditions, the motor can deliver 4.4 Nm of torque without exceeding its thermal limits, and it can accelerate toward the 3000 rpm nominal speed when the controller commands full voltage. Position data is generated by resolver feedback, giving the drive analog angle information that resists electrical noise.
The motor has a frame size of Motor Size 071, and its length corresponds to code B, which sets the active stack depth and overall weight. The motor is supplied without a blocking brake, so holding force must be supplied by the drive or an external mechanism when the shaft is stopped. It has a plain shaft, and it is fitted with a shaft seal to reduce lubricant migration into the stator cavity. Standard housing geometry and the absence of a side B shaft end streamline installation in tight cabinets.
Frequently Asked Questions about MDD071B-N-030-N2G-095GB0:
Q: What type of motor feedback does the MDD071B-N-030-N2G-095GB0 use?
A: The MDD071B-N-030-N2G-095GB0 motor uses resolver feedback for precise position detection.
Q: What is the continuous torque at standstill for the MDD071B-N-030-N2G-095GB0 motor?
A: This model offers a continuous torque of 4.4 Nm at standstill.
Q: What shaft type and seal does the MDD071B-N-030-N2G-095GB0 feature?
A: The shaft configuration is a plain shaft with a shaft seal for added protection against contaminants.
Q: What is the connection direction and type for the MDD071B-N-030-N2G-095GB0 motor?
A: The electrical connection on this motor is a connector oriented in the Side B direction.
Q: Does the MDD071B-N-030-N2G-095GB0 motor come with a holding brake?
A: This motor does not include a holding brake.
