Product Description:

The MDD071A-N-060-N2T-095PA2 is a brushless AC servomotor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It interfaces with digital drive controllers to convert commanded current into regulated mechanical rotation. This supports the velocity and position control needed for repeatable operation in packaging lines, material-handling gantries, and machining centers. The motor is intended for closed-loop servo applications where rapid response and stable motion are required during frequent starts, stops, and reversals.

The mechanical interface uses a centering diameter of 95 mm, providing accurate pilot alignment when the motor is mounted. A continuous standstill torque of 2.2 Nm resists load forces during static holding, while the integrated blocking brake secures the axis with 6.5 Nm when power is removed. During operation, the rotor can sustain a nominal speed of 6000 rpm, supporting high-throughput applications. Standard dynamic balancing keeps vibration low, and the standard housing permits convection cooling inside enclosures. Power and feedback conductors terminate on a single connector, a shaft seal protects internal bearings from contaminants, and a keyed shaft end simplifies coupling to pulleys or gears. This arrangement also keeps the motor connection area compact.

Size code 071 indicates the stator diameter, and length code A marks the shortest rotor stack in this family, yielding reduced inertia for agile motion profiles. Position information is delivered through digital servo feedback generated by an integrated multiturn absolute encoder, allowing multi-revolution tracking without a homing routine. All cabling exits on Side A, easing dress-pack routing when the motor is placed near linear guides. The shaft is provided only on the drive side, matching the standard single-ended configuration. Absolute position data remains available across multiple shaft revolutions, which helps maintain controlled motion after power is restored.