Product Description:

The MDD071A-N-060-N2T-095GB0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for direct connection to compatible digital drive controllers, where it delivers precise torque and speed control to automated machines that require a compact rotary actuator. In closed-loop motion systems, the motor converts electrical energy into repeatable shaft movement for pick-and-place heads, feed rolls, and light conveyor stations. This makes it suitable for axes that need consistent speed regulation and repeatable positioning over short travel moves.

The motor can exert a continuous standstill torque of 2.2 Nm, which is the amount of load it can hold at zero speed without overheating under rated conditions. During operation, it reaches a nominal speed of 6000 rpm, allowing rapid positioning cycles when paired with a suitable inverter. Mechanical centering on a 95 mm pilot helps align the frame to the machine flange, and power plus feedback lines exit on side B through a keyed connector. This layout helps keep cable routing orderly in compact installations, while the plain shaft profile accepts friction-fit couplings and standard dynamic balancing helps limit vibration during motion.

For position control, the unit sends data through digital servo feedback, while absolute position is provided by an integrated multiturn absolute encoder that allows startup without a homing cycle after power loss. The output side is fitted with a shaft seal, which helps keep lubricant inside and fine particles out of the bearing area. The size code 071 places the motor in the medium-frame portion of the MDD lineup, and the short A-length housing supports use on shallow mounting plates. Because the design does not include a blocking brake, any static holding requirement must be handled by the drive or an external clamp, and the single-ended shaft arrangement supports straightforward inline coupling.