Product Description:

The MDD071A-N-060-N2T-095BP0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a compact rotary actuator, it works with compatible digital drive controllers to deliver closed-loop motion in assembly cells, packaging lines, and material handling axes. By combining a permanent-magnet rotor with precise electronic commutation, the unit converts electrical power into controlled mechanical rotation for midsize tooling and feed tasks. This motor is intended for applications that require repeatable speed and position control without a large installation footprint.

The mechanical interface uses a centering diameter of 95 mm, allowing the flange to locate accurately on machine frames and maintain alignment during high-speed operation. At standstill, the motor can provide 2.2 Nm, so it can hold or slowly index loads while staying within thermal limits. During normal operation, it reaches a nominal speed of 6000 rpm, matching applications that demand rapid cycle times without gear reduction. Position data is supplied through an integrated multiturn absolute encoder, enabling the controller to track revolutions even after power removal. Command and feedback signals use digital servo feedback, which supports high-resolution commutation and quick diagnostics. The unit is delivered without a blocking brake, a configuration that minimizes inertia for dynamic start-stop tasks where external clamping devices are already present.

The motor has length code A, which indicates the shortest stack in the 071 frame and helps simplify installation where space is limited. It also has a 071 frame size, and paired with a standard housing and standard rotor balancing, it is suitable for stable operation on precision guides. This compact format is useful when the axis must fit into short machine sections or crowded mounting areas. The shaft is supplied in the normal single-ended form, so auxiliary sensors or gearboxes can couple directly to side A while side B remains closed to protect the bearings from contamination.