MDD071A-N-060-N2S-095PB2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD071A-N-060-N2S-095PB2 is a motor from the MDD Synchronous Motors series, designed for digital drive controllers. It features a nominal speed of 6000 per minute, a continuous torque at standstill of 2.2 Nm, and has a digital servo feedback system. The motor comes with a 95 mm centering diameter, blocking brake with 6.5 Nm holding torque, and a keyway shaft with shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071A-N-060-N2S-095PB2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers and converts controlled electrical energy into precise rotary motion. This makes the motor suitable for indexing tables, pick-and-place modules, and compact spindle axes that require responsive acceleration and stable speed control. When paired with a compatible drive, it supports repeatable motion profiles so tooling and material-handling components can run with consistent timing through short, frequent cycles.
At its rated operating point, the rotor reaches 6000 rpm, allowing high axis speed without added gearing. A continuous standstill torque of 2.2 Nm helps keep the load stable during dwell periods while limiting current demand. The housing uses a 95 mm pilot diameter for direct alignment with compatible flange patterns, which helps the motor seat accurately during installation. Power and feedback conductors exit on Side B through a quick-disconnect connector, so the cable set stays compact at the rear of the motor. Position and velocity information are returned by digital servo feedback (DSF), allowing the drive to correct deviations in real time and maintain smooth closed-loop control. Standard dynamic balancing reduces vibration, and the A length code identifies the shortest stator version for installations with limited axial space.
For power-off holding and emergency stopping, an integrated blocking brake supplies 6.5 Nm of static torque. The output shaft uses a keyway, allowing pulleys or flexible couplings to be mounted securely without a custom shaft interface. Frame size 071 provides a compact motor body while leaving enough space for the magnetic and mechanical elements needed in continuous servo operation. A shaft seal helps resist oil splash and dust ingress during machine use. The motor also uses a single-ended shaft arrangement on the drive side, which keeps the non-drive end closed and simplifies the overall mechanical layout.
Frequently Asked Questions about MDD071A-N-060-N2S-095PB2:
Q: What type of shaft does the MDD071A-N-060-N2S-095PB2 motor use?
A: The MDD071A-N-060-N2S-095PB2 motor uses a keyway shaft type, providing secure mechanical connection for your drive applications.
Q: What is the nominal speed of the MDD071A-N-060-N2S-095PB2 motor?
A: This motor achieves a nominal speed of 6000 min⁻¹, allowing for high-speed operation in automation systems.
Q: Does the MDD071A-N-060-N2S-095PB2 motor include a holding brake and what is its torque?
A: The MDD071A-N-060-N2S-095PB2 comes equipped with a holding brake that provides a torque of 6.5 Nm for reliable stopping and holding performance.
Q: What kind of motor feedback does the MDD071A-N-060-N2S-095PB2 motor offer?
A: This model provides digital servo feedback (DSF) for precise motor control and enhanced position detection.
Q: What is the continuous torque at standstill for the MDD071A-N-060-N2S-095PB2 motor?
A: The continuous torque at standstill for this model is rated at 2.2 Nm.
