Product Description:

The MDD071A-N-060-N2S-095PB0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts commanded current into regulated torque and speed for motion axes in automated machinery. Its compact frame and electronic feedback support closed-loop positioning in packaging lines, material handling stations, and other industrial automation tasks. This arrangement allows the motor and drive to work together for accurate speed regulation and repeatable positioning.

At a nominal speed of 6000 rpm, the rotor can follow high-frequency drive commands, making it suitable for rapid indexing duties. A continuous standstill torque of 2.2 Nm provides holding force for lightly loaded axes when motion is paused. Position data is returned through digital servo feedback, giving the controller high-resolution signals for velocity and position loops. Power and feedback connections are located on Side B, which helps route cables away from the load side. The motor uses a single-plug connector interface that simplifies cable attachment and helps maintain shielding integrity between the motor and the cabinet.

The centering boss measures 95 mm, allowing precise alignment to gearboxes or mounting flanges without additional bushings. The motor has Motor Length Code A, which keeps the overall depth short, and the drive end uses a keyway shaft to transfer torque reliably to pulleys or couplings. A shaft seal is fitted to protect the internal bearings from coolant or dust during operation. The motor uses a Standard housing that dissipates heat passively. It is supplied without a blocking brake, so vertical loads require an external holding device. Standard dynamic balancing and the single-ended shaft arrangement support installation in compact servo stages.