Product Description:

The MDD071A-N-060-N2S-095PA2 is a servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for digital drive controllers, it delivers controlled rotary motion to positioning and auxiliary axes in automated machinery. Its compact frame and standardized housing support mounting inside cabinets or directly on machine frames where installation space is limited. When paired with a compatible controller, the motor can respond quickly to command changes and maintain stable motion through repeated operating cycles.

The rotor is engineered for high-speed operation, and its nominal speed reaches 6000 rpm, enabling rapid indexing cycles. Under locked-shaft conditions, it sustains 2.2 Nm of continuous torque, which reflects its continuous stall capability. A built-in blocking brake provides 6.5 Nm of holding torque so vertical loads can remain stationary when power is removed. Accurate centering during assembly is supported by a 95 mm pilot diameter, and the frame size is 071. The motor uses a standard housing, a single-ended shaft, and length code A for a compact mechanical layout. This operating profile suits machines that need short cycle times without moving to a larger motor frame.

Service connections are arranged on Side A of the stator, so power and feedback cables leave from one direction for cleaner routing. That arrangement helps reduce routing conflicts in tight machine layouts. A shaft seal is fitted at the output end to help limit lubricant loss and reduce the entry of coolant or dust. Position data returns to the controller through digital servo feedback (DSF), supporting closed-loop speed and position control. Dynamic balance is graded as Standard, which keeps vibration suitable for keyed couplings during normal operation. The molded connector header helps preserve shielding continuity and supports orderly cable entry at the motor housing.