Product Description:

The MDD071A-N-060-N2S-095PA0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers and delivers regulated torque and speed in automated machinery. Permanent-magnet excitation and electronic commutation let the motor convert drive commands into controlled rotary motion for packaging, handling, and auxiliary axis applications. In servo systems, it supports stable motion during acceleration, deceleration, and steady running.

With a nominal speed of 6000 rpm, the motor can operate at high rotational speed when paired with a compatible inverter. Its continuous torque at standstill is 2.2 Nm, which indicates the steady torque available without overheating while the rotor is stationary. That output is useful on axes that must hold position or move slowly under load. A centering diameter of 95 mm helps align the housing with the machine flange and reduce mounting error. Feedback is provided through digital servo feedback, allowing the drive to monitor rotor position for closed-loop control. Power and signal conductors exit on Side A, so cable space is needed on that face of the motor.

The electrical interface uses a Connector plug style, which simplifies installation and keeps wiring organized at the motor connection point. The output shaft has a keyway for secure coupling to pulleys or hubs, and the keyed form helps transmit torque without relying only on clamping force. The motor is supplied without a blocking brake, so any holding function must be provided by the drive or by external hardware when power is removed. Contamination at the output end is limited by a shaft seal, which helps protect internal parts in lightly exposed environments. Standard dynamic balancing, a standard housing, motor size 071, length code A, and a single-ended shaft are also part of the configuration.