Product Description:

The MDD071A-N-060-N2S-095GR2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Delivered as a motor for digital drive controllers, it converts drive current into rotational motion that can be tightly regulated by closed-loop control systems in automated handling, packaging, and positioning equipment. A blocking brake holds the shaft whenever mains power is removed, while the standard housing and balancing scheme keep vibration and mounting effort low during continuous industrial service.

The motor can deliver a continuous standstill torque of 2.2 Nm, meaning it sustains that torque indefinitely without exceeding its thermal limits. When speed commands reach the rated value of 6000 min⁻¹, the rotor maintains synchronous operation with the drive’s output frequency, enabling high-cycle indexing. For short periods, the integrated brake applies 6.5 Nm to lock the axis, preventing drift on vertical or load-holding stations. A centering diameter of 95 mm aligns the flange precisely with machine frames and reduces runout error. Power and encoder leads mate to a single connector, simplifying panel wiring and allowing quick exchange during maintenance. Standard balancing and housing features keep the mechanical envelope compact and stable during operation.

The physical profile is identified as size 071 with motor length code A, giving designers a predictable stack length for tight equipment bays. The motor has a shaft seal, which helps limit lubricant migration and airborne contamination. Cables exit on the right side of the stator, which helps route conductors away from moving parts in many gantry or conveyor layouts. Feedback is provided through digital servo feedback (DSF), sending position data to the controller for precise commutation. A plain shaft, a standard shaft end on side A only, and a standard housing finish complete the configuration without adding unnecessary mass or complexity.