Product Description:

The MDD071A-N-060-N2S-095GL1 is a synchronous servo motor produced by Bosch Rexroth Indramat and listed in the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into precise rotary motion for positioning and speed regulation on automated lines that include pick-and-place units, feeders, or light conveying axes. Its housing and shaft geometry match the standard layout of the series, which helps the motor fit common machine interfaces with minimal adaptation. This makes it suitable for repeatable motion tasks where rapid starts, stops, and accurate settling are important.

Laid out with a centering diameter of 95 mm, the motor aligns directly in flange bores and maintains radial runout within the series tolerance band. The rotor can reach a nominal speed of 6000 rpm, supporting fast cycle times on applications that require repeated acceleration and braking. At standstill, it supplies 2.2 Nm of continuous torque, which helps the axis resist load changes without excessive heat rise. Power and feedback conductors exit on the left side, a layout that helps keep cable routing organized when multiple axes are mounted close together. Terminations are made through a sealed connector, which keeps the electrical interface compact and protected.

The integrated blocking brake delivers 3.0 Nm of mechanical holding torque to secure vertical or cantilevered loads after power is removed. Rotor position is reported by digital servo feedback (DSF), giving the drive controller the signal needed for stable speed and position control. A plain shaft reduces stress concentrations at the coupling, and the preinstalled shaft seal helps limit lubricant migration when the motor is paired with a gearbox. To limit vibration, the rotor uses standard balancing, which supports smooth rotation when the motor is coupled to precision ball screws or other directly driven mechanisms.