Product Description:

The MDD071A-N-060-N2S-095GL0 belongs to the MDD Synchronous Motors series from Bosch Rexroth Indramat and is intended for use with digital drive controllers. Within an automation cell, it delivers commanded motion profiles when paired with a compatible drive, turning electrical setpoints into mechanical rotation for gantries, indexing tables, or feed axes. This arrangement supports precise speed and position control in automated equipment. A standard housing keeps the outer dimensions consistent across the range, allowing it to fit into machinery that already accepts this frame size without mechanical redesign.

The motor develops a continuous standstill torque of 2.2 Nm, giving the axis sufficient holding force for precise positioning under rated thermal conditions. Its nominal speed reaches 6000 rpm, enabling high cycle rates when rapid traverse or fast pick-and-place strokes are required. A centering diameter of 95 mm aligns the stator precisely on the mounting pilot, while the connections exit on the left side so cable routing can be planned accordingly. Feedback is provided through digital servo feedback (DSF), which supplies position data to the controller for closed-loop regulation. The size code 071 indicates the stator diameter and supports a balance between compact mass and magnetic loading for mid-range servo applications.

The motor uses a connector interface for both power and encoder signals, which keeps the electrical connection compact. The shaft is a plain shaft that accepts standard clamp or collet couplings, and it includes a shaft seal that limits lubricant migration into the bearing region. The unit is supplied without a blocking brake, so external holding methods must be used when power-off retention is needed. Motor length code A represents the shortest body in the family, and standard rotor balancing supports smooth rotation across the full speed range. A standard shaft end without a side-B extension also helps the motor fit compact machine layouts.