Product Description:

The MDD071A-N-060-N2S-095GB2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where electronic commutation supports fast current response and accurate speed regulation in automated handling equipment. In these systems, the motor converts commanded electrical input into controlled rotary motion for positioning, transfer, and feed axes. The compact 071 housing suits multi-axis machine layouts that need servo performance in a small installation space, and its standard housing and balancing support stable operation without additional vibration tuning.

This model delivers a continuous standstill torque of 2.2 Nm, allowing steady holding force in indexing tables and material feeds. During motion, it reaches a nominal speed of 6000 rpm, which supports high axis velocity when it is paired with a compatible drive. A 95 mm centering diameter helps align the flange to the machine interface for accurate mounting. Power and feedback conductors exit on Side B, and the plug-in connector interface keeps cable attachment straightforward. The motor also uses a single shaft end, which helps conserve space in tight machine installations.

For power-off holding, the motor uses an electromechanical brake rated at 6.5 Nm, which is useful on vertical axes and other loads that must stay in place when supply power is removed. Feedback is provided by digital servo feedback (DSF), allowing the drive to monitor rotor position for closed-loop speed and position control. Mechanical output is transferred through a plain shaft, which is suited to collet-style couplings and other friction-based hub connections. A fitted shaft seal helps limit lubricant migration and keeps contaminants away from internal motor parts. The sealed shaft area is useful in installations where nearby machine components may carry grease or oil.