Product Description:

The MDD071A-N-060-N2S-095GB0 is a permanent-magnet synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts regulated current into repeatable rotary motion for indexing tables, pick-and-place axes, and other closed-loop automation points. The permanent-magnet design supports responsive acceleration and stable servo operation during frequent starts, stops, and reversing cycles. Within an automation cell, it supplies continuous torque and rapid speed changes on command as the electromechanical link between the controller output and the driven load.

Its nominal speed capability is 6000 rpm, letting motion sequences run at high cycle rates without auxiliary gearing. The motor provides 2.2 Nm of continuous standstill torque so an axis can hold position under load. A 95 mm centering diameter locates the housing precisely on mounting faces and helps limit radial runout. Power is transmitted through a plain shaft that suits clamp-style couplings and avoids key stress. Rotor angle feedback to the drive is delivered by digital servo feedback, enabling accurate commutation and position control during both motion and position holding. Because the unit is supplied without a blocking brake, static holding torque after power loss must be generated by the drive or by external mechanics.

Cables exit on side B through a sealed connector that simplifies wiring inside compact cabinets and enclosed machine frames. A factory balancing classification of standard grade keeps vibration within accepted servo limits, and the standard housing permits direct mounting to equipment frames. The motor has a shaft seal to help prevent lubricant migration, and only the A-side is equipped with an output shaft while the B-side remains closed. The build combines length code A with size 071, giving the motor a short axial package that fits tight mechanical spaces while maintaining normal heat dissipation during operation.