Product Description:

The MDD071A-N-060-N2S-095GA0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is supplied to work with digital drive controllers, where it translates commanded current into rotation for automated handling, packaging, or machining stations. The design goal is fast speed cycling and stable torque so motion axes can follow programmed trajectories without overshoot or delay, which is essential in tightly synchronized industrial production lines. This operating mode suits equipment that starts, stops, and reverses often during normal machine sequences.

The motor body follows size 071 with the compact length code A and uses a standard housing and balancing grade. A centering shoulder of 95 mm aligns the frame on mounting fixtures, while the continuous standstill rating of 2.2 Nm is the torque it can deliver indefinitely for holding or low-speed duties. Under rated excitation, it reaches a nominal speed of 6000 rpm, enabling short cycle times in high-throughput cells. Power and feedback conductors exit on Side A, and the factory-installed connector allows direct connection to cabinet wiring without field soldering. The cable outlet arrangement also helps maintain a clear routing path in compact machine layouts.

Position data are returned through digital servo feedback (DSF), so the associated controller can close velocity and position loops with high resolution. The rotor end uses a plain shaft that mates directly with couplings or pulleys, and it is fitted with a shaft seal to prevent lubricant migration into the stator chamber. For applications that stop motion electrically or with external brakes, the unit is delivered without a blocking brake, eliminating residual drag during rapid acceleration. This arrangement is useful on axes where holding force is supplied by the control system or by external machine hardware.