Product Description:

The MDD071A-N-060-N2M-095GB0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for pairing with digital drive controllers, the unit converts electrical input into rotary motion for positioning, velocity, and torque control tasks in automated machinery. It fits closed-loop motion systems where accurate response is needed during repeated machine cycles and short indexing sequences. A molded connector on the housing provides a quick-disconnect interface that keeps cable attachment straightforward at the motor.

The motor’s mechanical interface begins with a centering diameter of 95 mm, letting it seat precisely in mounting plates that share this locating feature. Electrical and feedback leads leave the housing on Side B, which helps route cables away from the driven load. At standstill, the stator can deliver a continuous torque of 2.2 Nm, so the motor can hold that load indefinitely without thermal overload. For position tracking, the rotor couples to an integrated multiturn absolute encoder, allowing the drive to read the shaft angle across multiple revolutions without battery backup. The motor is supplied without a blocking brake, so applications that need static holding force must rely on external clamping or drive torque. Cable exit placement can also help reduce tight bends near adjacent machine parts.

Dynamic performance is linked to the rated velocity of 6000 rpm, which suits lightweight indexing or spindle duties that require quick acceleration. Command information travels through digital servo feedback, enabling high-resolution current loops in the associated controller. A smooth plain shaft simplifies coupling with clamp hubs or friction wheels, and a shaft seal protects the internal bearings from dust or oil splash during continuous duty. Standard balancing helps limit residual vibration, while the A length code keeps total mass low for gantry axes. This combination supports stable response during reversals and short positioning moves where smooth coupling and clean feedback are important.