MDD071A-N-040-N2T-095PB0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911265725
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
20 Seconds
The Bosch Rexroth Indramat MDD071A-N-040-N2T-095PB0 is part of the MDD Synchronous Motors series and is designed for use with digital drive controllers. This motor features a nominal speed of 4000 rpm, a centering diameter of 95 mm, and supplies a continuous torque at standstill of 2.2 Nm. It comes with an integrated multiturn absolute encoder, digital servo feedback, a keyway shaft type, and a standard housing without holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071A-N-040-N2T-095PB0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts regulated electrical power into controlled mechanical rotation for positioning and speed regulation in automated machinery. Its synchronous design supports quick response to current commands, which helps an axis follow short indexing moves and controlled speed changes with stable torque output. The 071 frame size and A-length body suit compact axes, and a built-in shaft seal helps keep dust or light spray from entering the housing during routine factory operation.
A centering diameter of 95 mm aligns the motor flange with mating surfaces, helping maintain accurate shaft positioning after installation. The shaft uses a keyway so torque can be transferred to pulleys, couplings, or gear inputs without slip under normal operating load. At standstill, the motor can supply 2.2 Nm continuously, which supports light holding duty when the drive remains energized. During motion, it reaches a nominal speed of 4000 rpm, making it suitable for fast cyclic movement in packaging, textile, and electronics equipment. Standard balancing helps limit residual vibration at higher speed, and the shaft seal protects internal parts from contaminants that could shorten bearing or feedback life.
Power and signal plugs are routed on side B of the housing, which can simplify cable routing where rear or side access is limited. The motor uses a single connector interface, reducing the number of separate cable entry points on compact axes. Position information is returned through digital servo feedback, and the feedback system uses an integrated multiturn absolute encoder so rotor angle is available across multiple revolutions without a homing cycle after startup. The motor is supplied without a blocking brake, so any holding force at rest must come from the energized drive or from external machine mechanics. This arrangement suits applications where motion control remains active during normal stops and a separate brake is not required.
Frequently Asked Questions about MDD071A-N-040-N2T-095PB0:
Q: What is the continuous torque at standstill for the MDD071A-N-040-N2T-095PB0 motor?
A: This model provides a continuous torque of 2.2 Nm when at standstill.
Q: What type of encoder is included in the MDD071A-N-040-N2T-095PB0?
A: The encoder is an integrated multiturn absolute encoder, ensuring precise position detection for the motor.
Q: What is the connection direction and type for the MDD071A-N-040-N2T-095PB0 motor?
A: The electrical connection is made via a connector located on Side B of the motor.
Q: Does the MDD071A-N-040-N2T-095PB0 motor have a holding brake?
A: This motor does not include a holding brake in its configuration.
Q: What shaft configuration does the MDD071A-N-040-N2T-095PB0 motor supply?
A: The shaft features a keyway and comes with a shaft seal, providing secure mechanical coupling and added protection.
