Product Description:

The Bosch Rexroth Indramat MDD071A-N-030-N2T-095PB0 belongs to the MDD Synchronous Motors series. It is supplied as a motor for digital drive controllers and is used in industrial automation to deliver commanded torque and speed directly to machine shafts without intermediate gear reduction. In automated lines, this arrangement lets the drive regulate speed and position directly at the motor shaft for repeatable motion on indexing, transfer, and feed axes.

This model can generate a continuous standstill torque of 2.2 Nm, allowing stable holding force when the load is static. Under rated electrical frequency, it reaches a nominal speed of 3000 rpm, giving adequate velocity for packaging and material-handling duties. Power and feedback conductors exit on side B, which can simplify cable routing when drives sit to the left of the axis. The motor uses a plug-style connector, so installation uses mating circular plugs rather than hard-wired cable glands. Because it is delivered without a blocking brake, position holding during power loss must be provided by an external mechanism or drive torque. Standard rotor balancing and a standard housing support smooth running and stable thermal behavior during normal duty.

A centering diameter of 95 mm mates directly to precision flanges, and a fitted shaft seal helps limit dust or coolant ingress during washdown operation. The steel shaft uses a keyway, which simplifies torque transfer to pulleys or rigid couplings, and there is no rear shaft extension, which helps keep the package compact. An integrated multiturn absolute encoder provides position data, while digital servo feedback supports compatible Indramat control loops. Size code 071 and length code A keep mass low for gantry axes. The motor has a standard housing finish and standard dynamic balance for steady rotation across its speed range.