MDD071A-N-030-N2T-095PA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD071A-N-030-N2T-095PA2 is part of the MDD Synchronous Motors series and has a nominal speed of 3000 rpm with a continuous torque at standstill of 2.2 Nm. This motor features a 95 mm centering diameter, a keyway shaft type with a shaft seal, and an integrated multiturn absolute encoder. It is equipped with a blocking brake providing 6.5 Nm of holding brake torque and uses digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071A-N-030-N2T-095PA2 synchronous servo motor is produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Intended for direct pairing with digital drive controllers, this compact unit converts electrical control commands into precise rotary motion for positioning tables, pick-and-place axes, and similar industrial automation tasks. Its synchronous design supports accurate speed regulation and repeatable positioning during start, stop, and reversal. The compact housing suits installations where machine space is limited and orderly cable routing is important. It is well suited for automated equipment that requires quick cycle changes and smooth response under changing load conditions.
Its centering flange is machined to 95 mm, allowing alignment with standard gearboxes or machine frames. When the rotor is locked, the motor can continuously deliver 2.2 Nm of torque without exceeding thermal limits. During operation, the windings support a rated speed of 3000 rpm, allowing stable operation in high-response motion systems. A spring-applied brake generates 6.5 Nm of holding torque to keep vertical loads secure after power removal, and the shaft features a keyway for positive torque transmission. Electrical power and feedback are routed through a connector on the front end, which helps keep cable routing compact.
Connections are positioned on Side A, which keeps cable bends short in tight machine enclosures. Rotor balance follows Standard balancing grade to reduce residual vibration at full speed. Position data is provided by an integrated multiturn absolute encoder, and the drive receives that information through Digital servo feedback (DSF) signaling for real-time position control. The 071 frame size keeps inertia low for fast acceleration. The A-length housing uses a shaft seal and a standard single-ended shaft, leaving no shaft extension on side B and helping protect internal components from splash and dust.
Frequently Asked Questions about MDD071A-N-030-N2T-095PA2:
Q: What is the continuous torque at standstill for the MDD071A-N-030-N2T-095PA2 motor?
A: The MDD071A-N-030-N2T-095PA2 provides a continuous torque of 2.2 Nm at standstill.
Q: What type of encoder is included with the MDD071A-N-030-N2T-095PA2 motor?
A: This model is equipped with an integrated multiturn absolute encoder for position feedback.
Q: Does the MDD071A-N-030-N2T-095PA2 motor include a holding brake, and what is its torque rating?
A: A holding brake rated at 6.5 Nm is included on this motor for secure holding when powered off.
Q: What type of shaft and sealing does the MDD071A-N-030-N2T-095PA2 motor offer?
A: The motor's shaft features a keyway and comes with a shaft seal to prevent contaminant ingress.
Q: What is the nominal speed of the MDD071A-N-030-N2T-095PA2 synchronous motor?
A: This motor operates with a nominal speed of 3000 min⁻¹, suitable for dynamic applications.
