Product Description:

The MDD071A-N-030-N2T-095GL0 is a compact synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for direct use with digital drive controllers, it converts controlled current into tightly regulated shaft rotation for indexers, pick-and-place modules, and lightweight conveying axes. It is suited to applications that require repeatable positioning and stable speed control during short, frequent moves. Its frame size 071 and A-length housing keep overall mass low, which helps where compact servo axes need fast response and limited installation space.

This model delivers a continuous standstill torque of 2.2 Nm, which is the load it can hold at zero speed while energized. Its nominal operating speed is 3000 rpm, and this speed with the rated torque describes the motor's operating range during normal use. A centering diameter of 95 mm aligns the motor precisely to gearboxes or flanges, helping reduce concentricity error at the coupling point. All power and feedback conductors exit on the left side through a sealed connector, and position data are returned over digital servo feedback (DSF) so the drive can correct positional deviation within one control cycle. The cable outlet arrangement can also help keep wiring clear of nearby moving parts.

An integrated multiturn absolute encoder stores shaft position across power cycles, so the axis does not need a homing routine after shutdowns. The unit is supplied without a blocking brake, so external clamping or drive torque must hold vertical loads during power loss. A configuration with a shaft seal helps restrict contaminant ingress at the coupling face, and the plain shaft permits direct coupling through backlash-free clamps. Standard dynamic balancing reduces vibration during fast indexing, and the T-direction connector orientation helps preserve compact axial space in closely packed machine sections.