MDD071A-N-030-N2T-095GA1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911264198
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
2 Seconds
The Bosch Rexroth Indramat MDD071A-N-030-N2T-095GA1 is part of the MDD Synchronous Motors series and is intended for use with digital drive controllers. This motor features a nominal speed of 3000 rpm, a centering diameter of 95 mm, and digital servo feedback. It comes with an integrated multiturn absolute encoder, a plain shaft with a shaft seal, and includes a holding brake with 3.0 Nm torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071A-N-030-N2T-095GA1 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As an electromechanical actuator, this motor couples with digital drive controllers to translate electrical commands into rotational motion used in indexing tables, packaging axes, and other industrial automation equipment. Its compact frame and integrated feedback system allow closed-loop control within multi-axis machinery. That operating role supports repeatable starts, stops, and position changes during automated cycles.
A centering diameter of 95 mm allows accurate seating against a machine flange and supports the motor's standard balancing grade, which limits residual vibration. Power and feedback conductors exit on side A through a sealed industrial connector, keeping cable access convenient in tight cabinets. At standstill, the motor can deliver 2.2 Nm of continuous torque, while motion and homing data are supplied by an integrated multi-turn absolute encoder that resolves position across multiple revolutions. For statically loaded vertical axes, the unit incorporates a blocking brake that can hold up to 3.0 Nm; this brake engages automatically whenever the drive is disabled. A standard housing encloses the windings, and the short stack described by motor length code A helps keep the overall mass low.
During operation, the drive controller receives position and velocity data via digital servo feedback (DSF), supporting tight current loops up to the rated speed of 3000 rpm. The motor is intended for digital drive controllers, and its frame coded as 071 suits compact automation modules where space and inertia must be limited. A sealed shaft passage helps prevent lubricant migration, and the motor has a shaft seal with only one shaft end on the front face, leaving side B blank. The rotating member is a plain shaft, which simplifies coupling to clamping hubs or bellows couplings. This shaft arrangement is appropriate where a clean, direct mechanical connection is preferred.
Frequently Asked Questions about MDD071A-N-030-N2T-095GA1:
Q: What type of encoder is included in the MDD071A-N-030-N2T-095GA1 motor?
A: The MDD071A-N-030-N2T-095GA1 motor features an integrated multiturn absolute encoder for precise position feedback.
Q: What is the continuous torque at standstill for the MDD071A-N-030-N2T-095GA1?
A: This motor has a continuous torque of 2.2 Nm at standstill for reliable performance under load.
Q: How much torque does the holding brake on the MDD071A-N-030-N2T-095GA1 provide?
A: The MDD071A-N-030-N2T-095GA1 possesses a holding brake with a torque rating of 3.0 Nm for secure holding functionality.
Q: What type of shaft and sealing does the MDD071A-N-030-N2T-095GA1 have?
A: A plain shaft configuration is used on this model, finished with a shaft seal for extra protection.
Q: What is the nominal speed of the MDD071A-N-030-N2T-095GA1 motor?
A: This motor's nominal speed is rated at 3000 min⁻¹, making it suitable for applications requiring moderate rotational speeds.
