MDD071A-N-030-N2S-095PR1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD071A-N-030-N2S-095PR1 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. This motor has a nominal speed of 3000 rpm, features digital servo feedback, and provides a continuous torque at standstill of 2.2 Nm. It comes with a holding brake delivering 3.0 Nm of torque, a centering diameter of 95 mm, and uses a keyway shaft type.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071A-N-030-N2S-095PR1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. The unit is intended for integration with digital drive controllers where precise velocity and position loops are required. By supplying controlled torque to rotary axes, it supports pick-and-place platforms, packaging stations, and light machining centers. This motor type is suited to axes that must start, stop, and reverse with repeatable response under changing load. Its compact format suits installations where axis spacing and mounting depth must be kept under control.
Its continuous stall capability reaches 2.2 Nm, allowing the axis to hold load without overheating when motion is paused. During dynamic cycles, the rotor can attain 3000 rpm, a nominal speed that supports rapid indexing in medium-inertia mechanisms. Torque is transmitted through a keyway shaft, and the integrated brake can clamp with 3.0 Nm of torque for power-off holding. Mechanical alignment to gearboxes or mounts is simplified by the 95 mm centering diameter, while the shaft seal helps block lubricant migration and dust entry. Electrical power and feedback leave the housing through a connector on the right-angle head, and the A motor length keeps the overall depth compact for tightly arranged machine layouts.
Cabling is routed to the right side, which can simplify harness paths and reduce crossovers inside the machine. Motion feedback is provided as Digital servo feedback (DSF), and this high-resolution signal lets the drive close the control loop without an auxiliary encoder. The motor belongs to size 071, offering a frame that balances torque output with a small footprint. Its design includes a blocking brake to secure vertical or suspended loads when control power is removed. Standard balancing supports smooth running at rated speed, and the absence of a second shaft end helps keep the motor shorter. That arrangement also leaves more room for couplings, guards, or nearby machine structures.
Frequently Asked Questions about MDD071A-N-030-N2S-095PR1:
Q: What is the continuous torque at standstill for the MDD071A-N-030-N2S-095PR1 motor?
A: This model delivers a continuous torque of 2.2 Nm at standstill.
Q: Does the MDD071A-N-030-N2S-095PR1 come with a holding brake, and what is its torque?
A: A holding brake with a torque of 3.0 Nm is integrated into this motor.
Q: What type of feedback does the MDD071A-N-030-N2S-095PR1 motor use?
A: This motor uses digital servo feedback (DSF) for precise position control.
Q: What is the nominal speed of the MDD071A-N-030-N2S-095PR1 motor?
A: The nominal speed for this motor is 3000 min⁻¹.
Q: What type of shaft and seal does the MDD071A-N-030-N2S-095PR1 feature?
A: A standard shaft with keyway and a shaft seal is used on this model.
