Product Description:

The MDD071A-N-030-N2S-095PR0 is manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. It is a servo motor for digital drive controllers and is used in automation systems that need precise velocity and position control, including packaging stations, pick-and-place axes, and material-handling gantries. This three-phase motor converts commanded current into repeatable rotary motion and returns position information for closed-loop control inside the drive. That arrangement lets the system correct speed and position deviations as load conditions change, which is useful in repetitive production equipment.

At standstill, the rotor can supply 2.2 Nm of continuous torque, giving moderate holding capacity for lightly loaded axes. The motor reaches a rated speed of 3000 rpm, which suits fast servo applications and supports short cycle times in digital motion systems. A centering pilot of 95 mm provides concentric alignment to gearboxes or mounting flanges. The rotor uses standard balancing to limit residual vibration at higher speed, and the housing matches the 71-frame design used for this motor size. Position data is transmitted through digital servo feedback for closed-loop control. All power and feedback plugs exit on the right side, which can simplify cable routing when several axes are mounted close together. The motor is supplied without a blocking brake, so stopping torque must be provided by the drive or by external mechanics.

The output shaft uses a keyway and includes a durable shaft seal that helps limit lubricant migration into the stator area. Power is delivered through a keyed circular connector, and the single-ended shaft design omits a side B extension. This layout leaves the drive end available for couplings or pulleys without adding shaft length on the opposite side. The motor uses frame size 071, and length code A keeps the housing compact for installations with limited space.