Product Description:

The MDD071A-N-030-N2S-095PL0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed to pair with digital drive controllers, it converts controlled electrical input into regulated mechanical rotation for positioning or velocity-regulated axes on automated machinery and handling equipment. Its servo design supports repeatable motion on transfer units, indexing stations, and feed axes where the controller must correct speed and position continuously. This type of motor is commonly used when compact installation and accurate rotary response are required in the same axis package.

The motor’s centering diameter is 95 mm, giving the flange a pilot for repeatable alignment to gearboxes or mounting brackets. Power and feedback conductors exit on the left side, which can simplify cable routing when multiple axes are stacked horizontally or installed in narrow machine frames. A keyed circular connector provides a secure electrical connection without separate terminal blocks. During static operation, it can sustain 2.2 Nm of continuous torque for applications that dwell under load. Under rated excitation, the rotor reaches 3000 rpm, allowing the motor to cover a useful speed range for many positioning and velocity-control tasks.

Closed-loop regulation is handled by integrated digital servo feedback, so the controller receives position information directly from the motor. A fitted shaft seal helps block coolant spray and fine dust from the bearing cavity during machine operation. Because the unit is supplied without a blocking brake, holding torque must be provided by the drive or by an external device when the axis is stopped. The output shaft uses a keyway, allowing torque transfer through standard keyed hubs. The motor also has standard balancing, a compact A-length stator, and no second shaft end, which helps keep installation depth short in tight actuator spaces.