MDD071A-N-030-N2S-095PB2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911275025
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
17 Seconds
The Bosch Rexroth Indramat MDD071A-N-030-N2S-095PB2 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. It features a continuous torque at standstill of 2.2 Nm and a nominal speed of 3000 rpm. The motor has digital servo feedback, a keyway shaft with a shaft seal, and a centering diameter of 95 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD071A-N-030-N2S-095PB2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts electrical energy into controlled mechanical rotation. This allows industrial axes to index, position, or follow speed commands in automated packaging, printing, and material-handling equipment. Its synchronous design supports repeatable motion under closed-loop control during continuous industrial operation.
With a centering diameter of 95 mm, the frame can be aligned accurately in a mounting pilot, while the rotor is factory balanced to the standard grade to limit vibration. The motor develops a continuous standstill torque of 2.2 Nm, providing steady holding force when the shaft is energized but motionless. At its rated electrical frequency, the shaft reaches 3000 rpm, which is the synchronous running speed used by the drive to scale motion profiles. Power and feedback conductors exit on Side B through a sealed connector arrangement, and position information is returned by Digital servo feedback (DSF) so the controller can close the velocity and position loop precisely. The motor length code is A, indicating the shortest stack in this frame.
For load holding during power-off events, the unit carries a blocking brake that supplies 6.5 Nm of static torque. The frame size code 071 indicates the external outline, and the shaft is machined with a keyway to transmit torque to pulleys or couplings without slip. A shaft seal is fitted to help keep lubricant and contaminants separated, and the shaft end is supplied only on the drive side to simplify bearing support on the opposite face. The shaft seal also helps protect the bearing area in environments with light contamination. A cast-aluminum housing in the Standard version completes the enclosure and supports the cabling interface, while the overall configuration is intended for use with Bosch Rexroth drive controllers that recognize the motor’s electronic nameplate.
Frequently Asked Questions about MDD071A-N-030-N2S-095PB2:
Q: What is the holding brake torque on the MDD071A-N-030-N2S-095PB2 motor?
A: The MDD071A-N-030-N2S-095PB2 features a holding brake with a torque of 6.5 Nm, ensuring stable positioning when stopped.
Q: What shaft configuration is present on the MDD071A-N-030-N2S-095PB2 motor?
A: A keyway shaft is provided, and the shaft does not extend from side B on this model.
Q: What type of feedback does the MDD071A-N-030-N2S-095PB2 motor use?
A: This motor is equipped with a digital servo feedback (DSF) system for precise control and communication with digital drive controllers.
Q: What is the direction and type of the electrical connection on the MDD071A-N-030-N2S-095PB2?
A: The electrical connection on this model is via a connector oriented toward side B.
Q: What is the continuous torque at standstill for the MDD071A-N-030-N2S-095PB2?
A: The continuous torque at standstill for this motor is rated at 2.2 Nm.
