Product Description:

The MDD071A-N-030-N2S-095PA1 is a synchronous servo motor produced by Bosch Rexroth Indramat and placed within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts electrical drive commands into rotary motion for axis groups and material-handling modules in automated plants. Its housing follows a standardized mechanical envelope, so it can fit compact machine frames without custom adapters or extra brackets. That layout supports direct installation on common mounting surfaces used in production equipment.

At the mechanical interface, the motor seats against a centering pilot of 95 mm, which helps align the housing accurately with the mating machine surface. Electrical and feedback leads exit on Side A and connect through a sealed connector, which helps keep cable routing concentrated at one end of the motor. Under closed-loop control, the unit can hold a continuous stall torque of 2.2 Nm, while routine motion reaches a rated speed of 3000 rpm. Position and velocity data are returned through integrated digital servo feedback (DSF), allowing the drive to track rotor movement and commutate the motor without an external encoder. The motor uses the 071 frame with the short A length, which helps reduce installation depth in compact assemblies.

In start-stop applications, the integrated blocking brake supplies 3.0 Nm of static torque to keep the axis fixed when power is removed. The shaft has a keyway and a shaft seal, which support positive torque transmission and help limit the entry of dust or light contamination near the bearing area. Because the design uses a standard housing with a single-ended shaft, the motor can be coupled directly to pulleys or gear sets without added support bearings. This arrangement suits positioning axes that must remain stationary between motion cycles.