Product Description:

The MDD071A-N-030-N2S-095GL2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts electrical commands into controlled rotary motion for positioning, speed regulation, and torque production. The compact motor package suits multi-axis packaging lines, pick-and-place modules, and material-handling stations that require repeatable motion and a small installation footprint. This operating role also supports automated equipment that depends on quick response and stable motion during repeated production cycles.

The motor has a nominal speed of 3000 rpm, which supports fast axis movement during normal operation. At standstill, it can provide 2.2 Nm of continuous torque, allowing the axis to hold a load without overheating under rated conditions. An integrated blocking brake applies 6.5 Nm during power-off or emergency stop conditions to resist back-driving. Position information is supplied by digital servo feedback (DSF), which gives the connected drive the data needed for closed-loop regulation. A centering diameter of 95 mm helps seat the motor accurately on the mounting surface and supports consistent alignment with the machine interface.

Power and feedback leads exit on the left side, and they are combined through a single multipole connector to keep the cable entry straightforward. The motor uses a plain shaft with a shaft seal, making it suitable for direct connection to clamping hubs, pulleys, or gear inputs while helping protect the bearing area from contamination. It uses size code 071 with length code A, so the housing remains short for this frame size. The motor is balanced to the standard grade and uses the standard housing version, and it is supplied without a side-B shaft extension. The single cable outlet can also simplify routing in compact machine layouts where space around the motor body is limited.