Product Description:

The Bosch Rexroth Indramat MDD071A-N-030-N2S-095GA1 is a synchronous servo motor in the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded current into precise rotary motion for positioning axes, pick-and-place modules, and other automated stations. Its integrated feedback system returns position and velocity data to the drive so the control loop can maintain repeatable speed and torque regulation during continuous machine cycles. This operating style suits automation tasks that require accurate indexing, stable motion, and consistent response during repeated starts and stops.

The motor reaches a nominal speed of 3000 rpm, which is the top continuous operating speed under rated conditions. At standstill, it can deliver 2.2 Nm of continuous torque, allowing the axis to carry steady load without thermal overload. For short braking or emergency stops, a blocking brake at the non-drive end supplies 3.0 Nm of static holding torque. A 95 mm centering diameter aligns the housing in precision frames and helps support accurate mounting. Position information is transmitted through digital servo feedback, allowing the controller to correct speed and position deviations during each control cycle.

Cabling enters on side A through a keyed industrial connector, which helps keep wiring clear of the driven mechanics. The output uses a shaft seal to limit lubricant escape and reduce contaminant entry, while the exterior uses standard housing construction and balancing for smooth rotation. With size code 071, length code A, and a plain shaft without a second shaft end, the motor fits compact machine spaces and accepts common coupling styles. The connector placement also helps simplify cable routing where nearby guards, couplings, or adjacent axes leave limited clearance around the drive end.