Product Description:

The MDD065D-N-060-N2M-095PB1 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts drive output into controlled rotation for pick-and-place stations, indexing tables, and packaging axes. The unit mounts directly on machine frames and communicates rotor position to Indramat inverters, enabling closed-loop speed and torque regulation in automated cells. Its compact servo design suits equipment that needs accurate motion in a limited installation space.

Installation geometry and dynamic capability are set by several key features. The centering diameter is 95 mm, providing the primary locating surface on the machine flange, and rotor mass is balanced to standard quality to reduce vibration. A continuous standstill torque of 2.7 Nm allows the axis to hold load without motion while remaining within winding temperature limits. The motor sustains a nominal speed of 6000 rpm, permitting rapid cycle times in light-duty servo tasks. Position and velocity are returned through Digital servo feedback (DSF), allowing the controller to monitor shaft position continuously. All power, brake, and feedback conductors are carried through a single industrial connector. The housing and shaft seal are both provided in the standard version, and the motor uses frame size 065 with length code D.

A blocking brake rated at 3.0 Nm clamps the rotor during an emergency stop or power loss. Cable entry is oriented toward the rear, identified as the motor's Side B connection direction, which helps keep wiring clear of front-mounted gear sets. Multi-turn position data are generated by an integrated multiturn absolute encoder, eliminating the need for external reference switches. The drive shaft uses a keyway for positive torque transfer, and the opposite end has no second shaft extension. This arrangement keeps the shaft layout simple and leaves the non-drive end unobstructed.