Product Description:

The MDD065D-N-060-N2M-095PB0 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts commanded current into mechanical rotation so automation systems can execute coordinated, repetitive motion sequences. The unit is supplied in a standard housing and relies on rotor precision balancing to minimize vibration during prolonged service in pick-and-place modules, indexing tables, and similar equipment. Its synchronous operating principle gives the drive a stable basis for accurate torque response during repeated starts, stops, and positioning moves.

A standard balancing grade keeps residual vibration low, and the centering pilot measures 95 mm, establishing the reference surface for flange alignment. Power and feedback cables are routed on side B through a sealed connector, which simplifies removal when the motor must be disconnected from the machine. At standstill, the motor can deliver 2.7 Nm of continuous torque, allowing the axis to resist steady load without extra gearing. Once energized, the rotor reaches a nominal speed of 6000 rpm, supporting rapid acceleration profiles. Position information is supplied by an integrated multi-turn absolute encoder, and the signal is returned to the controller as digital servo feedback for closed-loop regulation over both speed and position.

The mechanical outline uses length code D and frame size 065, giving the motor a compact footprint for closely spaced axes. It is delivered without a blocking brake, so holding force must come from the drive or external clamps when power is removed. A molded shaft seal surrounds the keyed output and helps protect the bearing area from contamination during normal operation. The output shaft uses a keyway to transmit torque directly into couplings or timing pulleys. There is no second shaft extension on side B, leaving the rear of the motor available for the feedback device and cable interface.