Product Description:

The MDD065D-N-060-N2M-095PA1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it provides closed-loop motion in automated assembly cells, electronic packaging machines, and other equipment that requires accurate acceleration and deceleration under continuous duty. It interfaces directly with compatible drive amplifiers, translating command currents into rotary motion without additional gearing, which improves dynamic response in servo-controlled stations. This operating profile suits axes that need rapid starts, controlled stops, and consistent positioning over repeated machine cycles.

The motor uses frame size 065 with length code D and reaches a nominal speed of 6000 rpm for high-cycle applications. At standstill, it can supply 2.7 Nm of continuous torque, while the integrated blocking brake provides 3.0 Nm of holding torque when power is removed. Position data are provided by a multi-turn absolute encoder through digital servo feedback. Rotor balancing is standard, and the centering shoulder measures 95 mm to align the motor accurately with the machine interface.

From an installation standpoint, power and feedback lines are routed toward the mounting flange because the connections are located on Side A and use a single industrial circular connector. The output shaft uses a keyway and includes a fitted shaft seal, which helps protect the bearing area from oil splash and fine particulate ingress. A standard shaft end is provided only on the drive side, which helps keep the overall motor length compact. This cable orientation keeps the connection area close to the machine face and leaves the opposite end free for couplings or nearby components. The sealed shaft area is useful where the coupling zone is exposed to splash from lubricants or airborne debris.