Product Description:

The MDD065D-N-060-N2M-095PA0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it translates commanded current into tightly regulated rotation, enabling accurate positioning and speed control on pick-and-place tables, sewing heads, or auxiliary packaging axes. The motor combines feedback, power connection, and mechanical centering in one compact unit, which helps it fit neatly into dense multi-axis assemblies. Because the feedback device is integrated, the drive can monitor shaft motion without requiring a separate external sensing package.

A nominal speed of 6000 rpm permits rapid indexing without exceeding the motor's intended operating range, while a continuous stall torque of 2.7 Nm helps the axis hold tooling or load fixtures steady during dwell periods. The flange uses a centering recess of 95 mm to align the stator accurately with gearboxes or machine plates. Cables enter through a connector mounted on Side A, which keeps the opposite side clearer for nearby machine hardware. Rotor position is returned through Digital servo feedback (DSF) from the integrated multi-turn absolute encoder, so the controller receives fine-angle data together with the number of revolutions after power cycles. This feedback arrangement supports precise closed-loop motion and consistent restart behavior.

The shaft has a keyway, allowing simple keyed pulleys or gears to transmit torque without a splined coupling. Internal bearings are protected by a shaft seal, which helps limit contaminant entry during routine machine operation. The unit is supplied without a blocking brake, so vertical axes must rely on an external brake or drive-generated holding torque. The size 065 motor uses length code D and a single-ended shaft, which keeps the package compact for machines with limited installation space and allows straightforward coupling to common motion components.