Product Description:

Bosch Rexroth Indramat manufactures the MDD065D-N-060-N2M-095GR0, a member of the MDD Synchronous Motors series. This motor is intended for digital drive controllers, so it receives regulated current from a compatible servo amplifier and converts it into precise mechanical rotation. By combining integrated feedback electronics with a compact size-065 frame, it supports high-speed positioning and stable velocity control in packaging equipment, pick-and-place axes, and similar automated machinery. Its form factor also suits machines where installation space is limited but repeatable motion is still required.

The mechanical interface centers on a diameter of 95 mm, letting the frame align with gearboxes or flanges. At standstill, the stator supplies 2.7 Nm of continuous torque, which suits moderate steady loads during controlled operation. During motion, the rotor reaches 6000 rpm, making the motor suitable for fast indexing and feed applications. Electrical terminations exit through a single industrial connector, and both plugs face the right side to streamline wiring inside a multi-axis cabinet. A shaft seal helps keep coolant mist and fine dust away from the front bearing, which supports reliable operation in enclosed industrial equipment.

Position data comes from an integrated multi-turn absolute encoder, which retains position information over multiple revolutions and allows startup without a homing cycle. The signal is transmitted as digital servo feedback, enabling the controller to close both speed and position loops with high resolution. The motor uses a plain shaft, so couplings can be selected without matching a keyway profile. It is supplied without a blocking brake, so holding torque must be provided by the drive or an external mechanism when power is removed. Standard balancing, a standard housing, motor length code D, and the standard shaft end on side A are also part of the configuration.