Product Description:

The MDD065D-N-060-N2M-095GL0 is a synchronous servo motor produced by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into mechanical rotation for position or velocity control on compact industrial axes such as pick-and-place heads or indexing tables. This makes it suitable for packaging modules and compact transfer systems with frequent starts and stops. Its plain shaft, standard housing, and standard balancing allow direct coupling to precision loads while maintaining the dynamic behavior demanded in automated machinery.

This model delivers a continuous standstill torque of 2.7 Nm, so the axis can hold load without overheating when stalled. Once energized, the rotor can reach a nominal speed of 6000 rpm, supporting rapid cycle times in high-throughput stations. A centering diameter of 95 mm serves as the pilot fit for concentric mounting to gearboxes or adapter plates. Power and feedback conductors exit on the left side through a plug-in connector, which simplifies cable routing inside the machine. Rotor position is provided by an integrated multiturn absolute encoder, allowing the drive to synchronize immediately after power-up without a homing routine.

The motor frame uses size 065 and length code D, which gives a balance of inertia and continuous power for mid-scale servo axes. A shaft seal helps resist coolant spray and fine dust during operation. Digital feedback uses Digital servo feedback (DSF), supporting high-resolution position control in the matching Rexroth drive. The unit is supplied without a blocking brake, so separate holding mechanisms are required when the application needs static locking. A standard shaft end on side A and no side B extension simplify the coupling arrangement while keeping the motor layout straightforward.